Nanu instructions
🌿 Welcome to Nanu Vaporizer! Discover our simple step-by-step guide 📖 to get the most out of your device. Start now and enjoy every move! 🚀
Info tabs
To charge, the battery supplied must be in the device (negative pole, larger contact surface facing upwards).
Now plug the USB cable into a suitable power source. During the charging process, a battery symbol with a charge level indicator appears on the display.
You can charge the battery outside the device with a separate charger (not included).
The discharge current of the replaceable batteries should not be less than 20A.
Inserting an unsuitable battery
violates the device's warranty.
Remove the mouthpiece (1) from the vaporizer.
Fill the heating chamber (2) with chopped herbs.
Then put the mouthpiece of your choice back on the atomizer.
After use, only fill the heating chamber again after the evaporator has cooled down. Danger of burns!
On offPress the power button (3) 3 times quickly to turn the device on or off.
Choose between N (Normal) or T (Time) mode by pressing the plus (5) or minus (6) button, respectively . Confirm your selection by pressing the power button (4) again . The vaporizer will now heat up.
Memory function
When switching on, the last set temperature is selected.
The device has a built-in safety duration of 5 minutes and will automatically switch off if inactive for this period of time.
WaysNormal mode (N)
Set the temperature manually using the + / - buttons . Once the temperature is set, the vaporizer will heat up to the desired temperature. After the timer expires, the device will switch off automatically. To reheat the device, switch it back on.
Time mode (T)
First, set the starting temperature using the + / - buttons and confirm by pressing the power button. Then set the final temperature in the same way.
Now you can specify the session duration in minutes ( +/- buttons ) and confirm by pressing the power button. The device will now heat up to the starting temperature and continue heating to the final temperature over the selected period.
battery changeWith the device turned off, open the battery compartment by sliding the safety latch. Replace the 18650 battery with another 18650 battery. Close the battery compartment. The battery can be charged externally using the separately available USB-C charging adapter.
Endless timerThe device vibrates twice half a minute before the timer expires.
You can then extend the session at the final temperature by another 2 minutes by double-clicking the power button .
The device switches off automatically after the timer expires. To heat up the evaporator again, switch it on again.
Vibration on/offPress and hold the plus and minus buttons simultaneously for 3 seconds to turn the vibration on or off.
Switch between °C / °FPress and hold the power and minus buttons simultaneously to switch between Celsius and Fahrenheit.
