Remove the mouthpiece (1) by screwing it.

Fill the heating chamber (2) with chopped herbs. 

Then screw the mouthpiece back onto the atomizer.

After use, only fill the heating chamber again after the evaporator has cooled down. Danger of burns!

Press 3x credentials for  Power button (3) quicklyto turn on the device. or switch off. 

Choose between N (Normal)  or  T (Time) mode by clicking the Plus (5) or minus (6) button press. Confirm your selection by pressing again Power button (4). The vaporizer is now heating up. 

Memory function

When switching on, the last set temperature is selected.

The device has a built-in safety duration of 5 minutes and will automatically switch off if inactive for this period of time.

Normal mode (N) 

Set the temperature manually + / - buttons a. Once the temperature is set, the vaporizer heats up to the desired temperature. When the timer expires, the device switches off automatically. To heat up the device again, turn it on again.

Time mode (T) 

Put this first Starting temperature about the + / - buttons Turn it on and confirm by pressing the power button. Then do the same Final temperature . 

Now you can duration of the session specify in minutes (+ / - buttons) and confirm by pressing the power button. The device now heats up to the starting temperature and warms up to the final temperature over the desired period of time.

Unscrew the battery compartment with the device switched off. 

Replace the 18650 battery in the battery compartment with another 18650 battery. 

Close the battery compartment. 

The battery can be charged externally using the separately available USB-C charging adapter.

Half a minute before the timer expires vibrates the device twice. 

Then you can go through Double click on the power button the session in the final temperature by further 2 Minutes extend. 

The device switches off automatically after the timer expires. To heat up the evaporator again, switch it on again.

Hold that Plus and minus buttons at the same time for 3 seconds Press to turn vibration on or off.

Press the Power and minus button pressed at the same time to change from Celsius to Fahrenheit and vice versa.