Convectum instructions
🌿 Welcome to Convectum Vaporizer! Discover our simple step-by-step guide 📖 to get the most out of your device. Start now and enjoy every move! 🚀
Info tabs
To charge, the battery supplied must be in the device (negative pole, larger contact surface facing upwards). Now plug the USB cable into a suitable power source. During the charging process, a battery symbol with a charge level indicator appears on the display.
You can charge the battery outside the device with a separate charger (not included).
The discharge current of the replaceable batteries should not be less than 20A.
Inserting an unsuitable battery
violates the device's warranty.
Remove the mouthpiece (1) from the vaporizer.
Fill the heating chamber (2) with chopped herbs.
Then put the mouthpiece of your choice back on the atomizer.
After use, only fill the heating chamber again after the evaporator has cooled down. Danger of burns!
On offPress the power button 3x (quickly) to turn on the device. or switch off. Choose between N (Normal) or T (Time) mode by pressing the minus or plus button respectively. Confirm your selection by pressing the power button again. The vaporizer is now heating up.
The device has a built-in safety duration of 5 minutes and will automatically switch off if inactive for this period of time.
Normal mode (N)
Set the temperature manually using the + / - buttons. Once the temperature is set, the vaporizer heats up to the desired temperature. When the timer expires, the device switches off automatically. To heat up the device again, turn it on again.
Time mode (T)
First set the starting temperature using the +/- buttons and confirm by pressing the power button. Then set the final temperature in the same way. Now you can specify the duration of the session in minutes (+/- buttons) and confirm by pressing the power button. The device now heats up to the starting temperature and warms up to the final temperature over the desired period of time.
battery changeWith the device turned off, open the battery compartment by sliding the safety latch. Replace the 18650 battery with another 18650 battery. Close the battery compartment. The battery can be charged externally using the separately available USB-C charging adapter.
Endless timerHalf a minute before the timer expires vibrates the device twice.
Then you can go through Double click on the power button the session in the final temperature by further 2 Minutes extend.
The device switches off automatically after the timer expires. To heat up the evaporator again, switch it on again.
Vibration on/offHold that Plus and minus buttons at the same time for 3 seconds Press to turn vibration on or off.
Switch between °C / °FPress the Power and minus button pressed at the same time to change from Celsius to Fahrenheit and vice versa.
